Hengding automobile hub unit that talking about car maintenance, car owners will definitely think first paint and engine, but the wheels are most likely to ignore the place. To know the hub gives the visual impression of the appearance of the first one, and it is this seemingly inconspicuous place was able to reveal the owner's taste just right, so equip your car when you do not ignore the wheels.
When the wheels are difficult to remove surface stains, you should use a professional cleaning agents, which can often mild detergent to remove stains effectively, reducing the aluminum alloy surface damage. In addition, the hub itself, there is a layer of metal protective film, so pay special attention when cleaning do not use paint brightener or other abrasive materials. In driving the process must be careful to avoid causing virtually scratch to the hub of the "flawed" Once scratches or deformation, it should be repaired as soon as possible and re-paint treatment.
With scratch how to fix?
The first step, check the wounds, if there is no damage to the inside of the hub can be easily repaired, use paint thinners, cleaning wounds around the removal of impurities.
The second step, the deepest part of the scratch is difficult to remove dirt, then used a toothpick to get it completely clean.
The third step: To prevent mistakenly irrelevant by painting the tape carefully best to stick around in the scar.
The fourth step, finishing a good hair tip, coated with varnish, lacquer shrink slightly after drying, protruding slightly smeared some of the best.
The fifth step, after painting, to be completely dry and takes about a week's time. After drying, water-resistant paper dipped in soapy water to make a smooth surface.
The sixth step, with water-resistant paper grazed after clashes with a mixture of light, and then resort to waxing.
If you encounter deep scars, focus is to observe whether the exposed metal surfaces, if not see the metal surface will not rust, can concentrate coated with varnish. Place the pen tip up a little bit, and then wait for paint to dry completely. And to avoid this phenomenon, the car used in the beginning when we should be diligent flushing rim, daily driving a vehicle wash at least once each week to rim, first washed with water wet after cleaning and then scrub with a sponge , then use plenty of water
If you encounter deep scars, focus is to observe whether the exposed metal surfaces, if not see the metal surface will not rust, can concentrate coated with varnish. Place the pen tip up a little bit, and then wait for paint to dry completely. And to avoid this phenomenon, the car used in the beginning when we should be diligent flushing rim, daily driving a vehicle wash at least once each week to rim, first washed with water wet after cleaning and then scrub with a sponge , then use plenty of water.
Routine maintenance can not be ignored
Routine maintenance is also essential when wheel temperature is high, should be allowed to cool before cleaning, do not use cold water to wash; otherwise cause damage to alloy wheels, even the brake disc deformation The braking effect. In addition, at high temperatures with a detergent to clean aluminum Taiwan alloy wheels, wheel surface causes a chemical reaction and dull, affect the appearance.
Hengding automotive wheel hub unit means that when the asphalt stained difficult to remove, if the general cleaning agent avail, can try to clear the brush, but do not use excellent brush, especially iron brush, so as not to damage the hub surface. Some experts have introduced a clear asphalt remedies: the selection of medicinal "active oil" rubbed, get unexpected results, the owner may wish to try. In addition, the vehicle area near the waterfront, the wheels should be ground cleaned to avoid salt corrosion on the aluminum surface.
