Gives the appearance of wheel bearings is the first visual impression, it is able to place this seemingly insignificant right to reveal the owner's taste, so do not ignore the equipment when a car wheel bearings.
When the wheels are hard to remove surface stains, you should use a professional cleaner, the cleaning agents are often able to effectively remove mild stains, reduce the damage aluminum surface. In addition, wheel bearing itself there is a layer of metal protection film, so special attention when washing do not use paint, plating or other abrasive materials. In driving the process have to be careful to avoid wheel virtually scratch to create a "flawed", Once you have scratches or deformation, should be repaired as soon as possible and re-paint treatment.
With the scratch how to fix?
Repair concrete steps are six steps:
The first step, check the wounds, if there is no injury to the inside wheels can be repaired easily, use paint thinner, cleaning wounds around to remove dirt;
The second step, the deepest part of the scratch is difficult to remove dirt, then used a toothpick to get it thoroughly clean;
The third step: in order to prevent mistakenly independent part painting and best will be carefully attached to the adhesive tape wound around;
The fourth step, finishing a good hair tip, coated with modified lacquer, paint dry a little shrinkage, bulging slightly smeared some of the best;
The fifth step, after painting, to be completely dry and takes about a week. Dry with paper dipped in soapy water applied, the surface smooth;
The sixth step, with water-resistant paper grazed after clashes with a mixture of light, and then resort to waxing.
If they are deep scars, with emphasis on observation of the metal surface is exposed, if you can not see the metal surface will not rust, can be modified to concentrate on coated paint. Place up a little bit with the pen, then wait for paint to dry completely. In order to avoid this phenomenon, the car used in the beginning, when we should diligently wash wheels, the vehicle being driven every day at least once a week to wash wheels, washed with water after the wet, and then cleaning with a sponge scrub, then use plenty of water.
Routine maintenance can not be ignored
Routine maintenance is also essential, when the wheel temperature is higher, should be allowed to naturally cool before cleaning, do not use cold water to wash; otherwise damage to alloy wheels will make even the deformation of the brake disc affect the braking effect. In addition, high temperature aluminum platform with a detergent to clean the Wheel hub, will wheel surface chemical reactions, loss of luster, beautiful effect.
When the wheel hard to remove the tar-stained, if the general cleaning agent to no avail, can try to clear brush, but do not use the perfect brush, especially iron brush, so as not to damage the wheel surface. One kind of asphalt removal remedies: the medicinal use "active oil" rubbed, get unexpected results, we give it a try. In addition, the vehicle close to the beach area, the wheels should be cleaned frequently to avoid salt corrosion on the aluminum surface.
