Mention car maintenance, many owners will think of the engine and tires, and small wheels let uscompletely ignored, but we need to know the quality of the relationship between the wheel tyrequality, thus affects our lives, so that small wheels are also need our care, so if we improper maintenance hub appears damaged, how are we going to repair? Hengding hub will introduce.
Matters needing attention in the daily maintenance of the hub:
1, when the wheel when the temperature is high, should make its natural cooling after cleaning,do not use cold water to wash; otherwise, can make the aluminum alloy wheel hub is damaged,or even to the distortion of the brake disc and brake effect. In addition, in the high temperaturedetergent cleaning aluminum alloy wheel hub, will make the surface chemical reaction, loss of gloss, beautiful.
2, when the hub is stained with difficult to remove tar, be of no avail if the cleaning agentgeneral, usable brush try to clear, but do not use a hard brush, especially iron brush, so as not to damage the surface of the hub. The expert introduces a removal of tar remedies: use of medicinal "oil painting" inunction, can get beat all effect, the owners may wish to have a try.
Minor scratches can self repair:
The first step: to clean the hub. We can use the paint dilution, wipe the wound around, remove the dirt. Scratch the deepest part is very difficult to remove dirt, when available, it will becompletely clean. In the cleaning time, in order to prevent the misuse of the independent part of the paint, the best will be carefully wound around the tape.
The second step: the owner tidy hair tip, the varnish to wheel damage to the paint, then paint drying, painted in a slight bulge, for owners of observation.
The third step: completely dry car modification after the paint, with soap and water in paperdipped in water, the surface is smooth. Then use the mixture to wipe out the light, then wax.
The fourth step: if the owners found that there is a deep scar on the hub, but also must observe the metal surface is exposed, if you do not see the metal surface will not rust, can focus oncoated with varnish. To use the tip of one point one point location, and then paint is completely dry. If it is found that bare metal, it is best to replace.
