Maintenance Hengding wheel hub car owners certainly will first think of paint and engine, wheels are the most overlooked areas. But to know that gives the visual appearance of the wheel is the first impression, it is able to place this seemingly insignificant right to reveal the owner's taste, so do not ignore the equipment when a car wheel.
When the wheel is difficult to remove surface stains, you should use a professional cleaner, the cleaning agents are often able to moderate effectively remove stains and reduce damage to the aluminum surface. In addition, the wheel itself, there is a layer of metal protection film, so pay special attention to cleaning Do not use paint, plating or other abrasive materials. In driving the process have to be careful to avoid virtually scratch due to the wheel, "flawed", Once you have scratches or deformation, it should be repaired as soon as possible and re-paint treatment.
Hengding wheel hub to teach you specific steps to repair scratches are six steps:
The first step, check the wound, if there is no injury to the inside of the wheel, you can simply repaired, use paint thinner, wipe around the wounds, to remove dirt;
The second step, the deepest part of the scratch is difficult to remove dirt, then used a toothpick to get it thoroughly clean;
The third step: In order to prevent mistakenly unrelated partially coated paint, it is best to carefully tape attached to the scar around;
The fourth step, finishing a good hair tip, coated with modified paint, paint dry a little shrink, protruding slightly smeared some of the best;
The fifth step, after painting, to be completely dry and takes about a week. Dry with paper dipped in soapy water applied, the surface smooth;
The sixth step, with water-resistant paper grazed after clashes with a mixture of light, and then resort to waxing.
If they are deep wounds, the focus is to observe the metal surface is exposed, if not see the metal surface will not rust, modification of paint can be painted to concentrate. Place up a little bit with the pen, and other paint is completely dry. In order to avoid this phenomenon, the car used in the beginning, when we should diligently wash wheels, the vehicle being driven every day at least once a week to wash wheels, washed with water after the wet, and then cleaning with a sponge scrub, and then use plenty of water.
Hengding wheel hub to remind routine maintenance can not be ignored
When the wheel at high temperature, should be allowed to naturally cool before cleaning, do not use cold water to wash; otherwise cause damage to alloy wheels, even the brake disc distortion and affect the braking effect. In addition, high temperature detergent cleaning aluminum Wheel hub units, wheel hub will surface chemical reactions, loss of gloss, beautiful effect.
When the wheel hard to remove the tar-stained, if the general cleaning agent to no avail, can try to clear brush, but do not use the perfect brush, especially iron brush, so as not to damage the wheel surface. Some experts have introduced a clear tar remedies: the medicinal use "rolling oil" rubbed, get unexpected results, the owner may wish to try. In addition, the vehicle near the coastal area, the wheels should be cleaned frequently to avoid salt corrosion on the aluminum surface.
